VMware
Certified Professional on VSphere5 V1.1 Part4
QUESTION 1
Vendor:
VMware
Code:
VCP-510
QUESTION 1
Which
three features are only available in the vSphere Client when using a vSphere
Distributed Switch?
(Choose
three.)
A.
Port Mirroring
B.
PVLAN tagging
C.
Storage I/O Control
D.
Inress Traffic Shaping
E.
802.1q VLAN Tagging
Answer: ABD
QUESTION
2
Click
the Exhibit button. An administrator has been tasked with adding a newly installed
uplink to vSwitch1.
Based
on the exhibit, what is a true statement about this environment?
A.
The server does not have available vSwitches to be assigned to this uplink.
B.
The available uplinks are not compatible with a standard vSwitch.
C.
The host needs a driver installed for the newly installed uplink.
D.
The current uplinks cannot be attached because they are in use by other port
groups.
Answer: C
What
are three methods of adding virtual machine networking to a vSphere Distributed
Switch? (Choose three.)
A.
A portgroup can be created using the vSphere client and virtual machines can be
added using their
Properties
tab.
B.
A portgroup can be created as part of the Migrate Virtual Machine Networking
wizard before virtual
machines
are moved to the vDS.
C.
A portgroup can be cloned from a vSphere Standard Switch, inheriting the
virtual machines that were
attached
to the cloned portgroup.
D.
A portgroup can be created using the vSphere client and virtual machines can be
migrated using the Migrate
Virtual
Machine Networking wizard.
E.
A portgroup can be created during the creation of the vDS and virtual machines
can be migrated using the
Migrate
Virtual Machine Networking wizard.
Answer: ADE
QUESTION
4
Click
the Exhibit button. Based on the exhibit, what is the appropriate action to set
a preferred path?
A.
Paths cannot be set to preferred on this array.
B.
Right-click the path you want to prefer and then select Preferred.
C.
Right-click the path you want to prefer then select Active.
D.
Double-click the new path you wish to prefer. The other existing paths will be
set to Standby.
Answer: A
QUESTION
5
A
VMFS3 datastore has just been upgraded to VMFS5.
In
what two ways does this affect the datastore? (Choose two.)
A.
The existing VMFS3 block size is retained.
B.
The block size will be changed to 8MB.
C.
Any existing VMDK can be expanded up to 2TB.
D.
VMDKs retain their size limit from the VMFS3 block size.
Answer: AC
QUESTION
6
When
planning for an upgrade from vSphere4 to vSphere5 what will be the effect of
upgrading a 1TB VMFS3
datastore
with a 2MB block size to VMFS5?
A.
Thick virtual disks can be expanded to a maximum of 2TB.
B.
Thick virtual disks can be expanded to a maximum of 512GB.
C.
Thin virtual disks can be expanded to a maximum of 512GB.
D.
Thin virtual disks can be expanded to a maximum of 2TB.
Answer: D
QUESTION
7
Click
the Exhibit button. Based on the exhibit, what is the reason that two of the
paths are marked as Stand by?
A.
The other two paths were set to Active.
B.
The path configuration is required by the attached storage array.
C.
The active paths were set to Preferred.
D.
The storage adapters need to be rescanned before the paths will be set to
Active.
Answer: B
QUESTION
8
What
are two consequences of deleting a VMFS datastore from an ESXi 5.x host?
(Choose two.)
A.
The datastore is unaccessible from all connected ESXi hosts.
B.
The datastore and all virtual machines are removed from the storage device.
C.
The datastore and all virtual machines remain on the storage device.
D.
The datastore is only removed from that specific ESXi host.
Answer: AB
QUESTION
9
What
are three valid objects to place in a vApp? (Choose three.)
A.
Folders
B.
Hosts
C.
Resource pools
D.
vApps
E.
Virtual machines
Answer: CDE
QUESTION
10
Which
three Storage I/O Control conditions might trigger the Non-VI workload detected
on the datastore alarm?
(Choose
three.)
A.
The datastore is connected to an ESX/ESXi 4.0 host that does not support
Storage I/O Control.
B.
The datastore is on an array that is performing system tasks such as
replication.
C.
The datastore is utilizing active/passive multipathing or NMP (Native
Multi-Pathing).
D.
The datastore is storing virtual machines with one or more snapshots.
E.
The datastore is connected to an ESX/ESXi 4.0 host that is not managed by
vCenter.
Answer: ABE
QUESTION
11
An
administrator has just finished deploying a vApp for a web service. What three
options are available to the
administrator
for IP allocation within the vApp? (Choose three.)
A.
Transient
B.
Fixed
C.
DHCP
93
D.
Bridged
E.
NAT
Answer: ABC
QUESTION
12
An
administrator is working to implement Storage Profiles in their environment.
Which two ways can storage
capabilities
be generated? (Choose two.)
A.
They are generated by Datastore Clusters as LUNs are added to the cluster.
B.
They are automatically determined by the Storage Profile when it is created.
C.
They can be retrieved from the array through the VMware APIs for Storage
Awareness (VASA).
D.
They can be manually generated by the administrator.
Answer: CD
QUESTION
13
Which
VMware solution uses the security of a vSphere implementation and provides
linked-clone technology to
virtual
desktops?
A.
VMware ACE
B.
VMware View
C.
VMware Workstation
D.
VMware ThinApp
Answer: B
An
administrator is using Update Manager 5.x to update virtual appliances in a
vSphere environment. The
environment
is using the vCenter Server Virtual Appliance (vCSA).
What
would cause the remediation to fail?
A.
Updating of the appliance can only be done if the vCenter Server Virtual
Appliance (vCSA) has been put into
Maintenance
Mode.
B.
Remediation must be configured on the Appliance Administration page before use.
C.
Remediation of the vCenter Server Virtual Appliance (vCSA) with Update Manager
is not supported.
D.
Remediation requires the hosts to be connected to vCenter using an IPv4
address.
Answer: D
QUESTION
15
An
administrator is working to update the hosts and virtual machines in a vSphere 5.x
deployment using Update
Manager
Baselines.
Other
than host patches, which three items require a separate procedure or process to
update? (Choose three.)
A.
Operating system patches
B.
Virtual Appliance updates
C.
Virtual Machine Virtual Hardware upgrades
D.
VMware Tools on machines without VMware Tools already installed
E.
Application patches within the virtual machine
Answer: ADE
QUESTION
16
An
administrator selects the Profile Compliance tab of an vSphere cluster, then
selects Check Compliance Now.
Which
features requirements are not checked by this?
A.
vMotion
B.
Fault Tolerance
C.
DRS
D.
Host Profiles
Answer: D
QUESTION
17
An
administrator is troubleshooting an ESXi 5.x host and needs to export
diagnostic information. The host is
currently
managed by a vCenter Server instance. Which two ways can the information be
gathered using the
vSphere
Client? (Choose two.)
A.
Select Home. Under Administration, click System Logs and click the Export
System Logs button.
Select
the affected ESXi host. Select Select All. Select a location and click Finish.
B.
In the vSphere Client, select the affected ESXi host. Right-click the host and
select Export Diagnostic Data.
Select
a location and click OK.
C.
Log in to the ESXi host locally, Select Export System Logs.
D.
In the vSphere Client, select the affected ESXi host. Select File, Export and
Export System Logs.
Select
Select All. Select a location and click Finish.
Answer: AD
QUESTION
18
An
ESXi 5.x host displays a warning icon in the vSphere console and its summary
page lists a configuration
issue
"SSH for the host has been enabled." What are two ways to clear this
warning? (Choose two.)
A.
Using the Security Profile pane of the Configuration tab in the vSphere Client
B.
Using the Direct Console User Interface (DCUI)
C.
Using the Advanced Settings pane of the Configuration tab in the vSphere Client
D.
Using the Networking pane of the Configuration tab in the vSphere Client
Answer: AB
QUESTION
19
What
is an accurate statement about the secondary virtual machine of a VM that has
VMware Fault Tolerance
enabled?
A.
The secondary virtual machine cannot be stored on an NFS datastore.
B.
The secondary virtual machine is created on the same host as the primary.
C.
The secondary virtual machine can prevent other virtual machines from powering
up.
D.
The secondary virtual machine can be used for load balancing.
Answer: C
QUESTION
20
What
is true about the HA agent on ESXi 5.x hosts?
A.
HA agent logs and entries use the prefix aam
B.
HA agents are set to start by default
C.
HA agents can store configuration information locally
D.
vSphere client cannot determine which HA agent is master
Answer: C
QUESTION
21
An
administrator is enabling Network I/O Control (NIOC) on a vSphere Distributed
Switch. Which types of
network
traffic can be prioritized with NIOC by default? (Choose three.)
A.
FCP Traffic
B.
NFS Traffic
C.
Virtual Machine Traffic By Virtual Machine
D.
iSCSI Traffic
E.
vSphere Replication (VR) Traffic
Answer: BDE
QUESTION
22
How
can you verify that vStorage APIs for Array Integration (VAAI) functionality is
enabled for a storage array in
a
vSphere 5.x implementation?
A.
VAAI will be reported on the Hard Disk properties page for any VMDK stored on a
compliant array
B.
Hardware Acceleration will be reported on the Hard Disk properties page for any
VMDK stored on a
compliant
array
C.
Supported will be listed in the VAAI column for any datastore created on a
compliant array
D.
Supported will be listed in the Hardware Acceleration column for any datastore
created on a compliant array
Answer: D
QUESTION
23
The
RDP performance for a virtual machine on an ESXi 5.x host appears to be
degraded. What are two
possible
causes of the problem? (Choose two.)
A.
The virtual machine has a high Ready value.
B.
The virtual machine's network adaptor is not configured to Connect at power on.
C.
The virtual machine's network adaptor is not configured as connected.
D.
The virtual machine is on a physical network that has become saturated.
Answer: AD
QUESTION
24
An
administrator wants to configure a DRS Migration Threshold that allows
automated migration only when a
host
is placed into maintenance or to satisfy cluster constraints.
What
setting should be utilized?
A.
Priority 2
B.
Priority 4
C.
The most conservative setting
D.
The default setting
Answer: C
Which
conditions are true regarding an ESXi 5.x host placed into maintenance mode
while a member of a DRS
cluster?
(Choose two.)
A.
If the DRS cluster is in partially automated mode and vMotion is configured,
its virtual machines will be
moved
automatically to other hosts in the cluster.
B.
If the DRS cluster is in fully automated mode and vMotion is configured, its
virtual machines will be moved
automatically
to other hosts in the cluster.
C.
If the DRS cluster is in partially automated mode and vMotion is configured,
its virtual machines that have a
high
restart priority will be migrated to other hosts in the cluster.
D.
All the virtual machines on the host must be migrated or powered off before the
ESXi host will complete
entering
maintenance mode.
Answer: BD
QUESTION
26
When
designing a storage infrastructure to support ESXi 5.x hosts what limit will be
reached first?
A.
Maximum number of NFS datastores
B.
Maximum number of iSCSI LUNs
C.
Maximum number of paths to an iSCSI RDM
D.
Maximum number of iSCSI paths on a host
Answer: C
QUESTION
27
An
administrator is performing upgrades to ESXi 5.x from ESX 3.x and ESX 4.x
hosts.
What
is true about this procedure?
A.
A direct, in-place upgrade can be performed only on ESX 4.1 and later hosts.
B.
ESX 3.x hosts can be upgraded, but require an upgrade to 4.x before 5.x.
C.
A direct, in-place upgrade can be performed only on ESX 4.5 and later hosts.
D.
A direct, in-place upgrade can be performed only on ESX 3.5 and later hosts.
Answer: B
QUESTION
28
Click
the Exhibit button. An administrator is seeing a warning on one of their hosts.
The warning in the Triggered
Alarms
panel appears to come from a custom configured host alarm. The administrator
has not seen any
actions
taken for this alarm even though the actions are configured in the alarm
definition. The configured
actions
are shown in the exhibit.
What
change can the administrator make to correct the problem?
A.
Configure the Alarm Frequency to repeat more often.
B.
Add an action for when the alarm changes from yellow to red.
C.
Add an action for when the alarm changes from green to yellow.
D.
Configure the alarm yellow to red action to repeat for all three actions
configured.
Answer: C
QUESTION
29
A
company is planning an upgrade from vSphere 4.x to vSphere 5. They currently
have three dual CPU servers
licensed
for ESXi 4.1 Advanced
Each
server has 256GB of RAM installed.
Their
virtual machines are sized three ways.
Light.
1v CPU, 4GB RAM
Medium.
2v CPU, 8GB RAM
Heavy.
4 vCPU, 12GB RAM
The
Production workload consists of.
20
Light servers
20
Medium servers
2
Heavy servers
The
Development workload consists of.
10
Light servers
10
Medium servers
How
will vSphere 5 licensing impact their upgrade? (Choose two.)
A.
They will need to purchase additional ESXi licenses.
B.
They will be able to reduce their power consumption.
C.
They will be restricted from powering on additional virtual machines.
D.
A license upgrade will be needed to add vCPUs to the Heavy servers.
Answer: BC
Explanation/Reference:
QUESTION
30
What
is a benefit of vCenter Linked-Mode?
A.
Allows the vCenter Server Virtual Appliance (vCSA) to manage multiple sites
B.
Pools vRAM entitlement
C.
Increases vCenter security
D.
Increases vCenter reliability
Answer: B
QUESTION
31
What
virtual machine action listed below can be performed on a template?
A.
Power on
B.
Clone
C.
Edit Settings
D.
Migrate
Answer: B
QUESTION
32
Assuming
the appropriate HA configuration options have been selected, which of the
following situations would
result
in VMware HA NOT restarting virtual machines (Choose Two)?
A.
A guest OS fails
B.
A guest OS is manually powered off
C.
An ESX Server in the cluster becomes isolated from the network
D.
An ESX Server in the cluster is put into Maintenance Mode
Answer: AD
QUESTION
33
What
are the differences between Private and Public Cloud Computing?
A.
private cloud is provided to a single party, public is provided to public and
organizations
B.
private cloud is managed by a single party & public cloud is managed by
third-party
C.
private cloud is on-premises & public cloud is off-premises
D.
unknown choice
Answer: A
QUESTION
34
An
administrator has received calls about a virtual machine experiencing
intermittent application issues during
the
evening. To troubleshoot, the administrator needs to capture the virtual
machine in the state it is in during
the
evening hours for later analysis. Which two tasks would accomplish this
requirement? (Choose two)
A.
Create a scheduled task to clone the virtual machine once per evening
B.
Create an alarm that is triggered when a loss of VMware Tools heartbeat to the
virtual machine occurs.
C.
Use esxtop in batch mode and capture metrics during the evening hours.
D.
Create a scheduled task to create a snapshot of the virtual machine once per
evening
Answer: CD
QUESTION
35
A
virtual machine performance graph shows the swap in value to be at 95 percent
and the balloon value to be at
0
percent. Users of the virtual machines are complaining that performance is
slow. Which actions can be done
to
increase performance of the virtual machine? (Choose two)
A.
Use Storage vMotion to migrate the virtual machine
B.
Change the memory share value for this virtual machine to another datastore
C.
Install VMware Tools into this virtual machine to high
D.
Change the CPU share value for virtual machine to high
Answer: AC
QUESTION
36
Which
two circumstances would prevent the option of joining a Linked Mode group during
vCenter Server
installation?
(Choose two).
A.
An administrator is installing the first of the vCenter Server instances.
B.
An administrator installed vCenter Server instances using different domain
accounts.
C.
An administrator has vCenter Server instances in multiple domains
D.
An administrator is upgrading a VirtualCenter Server installation.
Answer: AD
